Hardware question
I have some SATA hard drives taken from old computers, and I want to see what's on them, to decide whether to save or scrap. And there's one SCSI drive, which gives an idea how hold one of these computers was.
Looking for recommendation for device that will allow me to connect the old internal drives to my new desktop. I've looked around on Amazon, but I'm just not sure whether what I'm looking at will do what I want. I thought all I needed was a cable of some kind, but I've learned that I also need a power source for the drives.
Thanks.
brush
(57,939 posts)nykym
(3,063 posts)matt819
(10,749 posts)Thanks.
FBaggins
(27,764 posts)But you could certainly get an external enclosure for about the same price if you want it to look nicer (I'd skip it if they're different size drives and you aren't planning on using them long-term). USB ports on a new computer can handle the power requirements.
The SCSI drive is a different issue and could get expensive (PCI SCSI controller? Are drivers even available in WIN10?). Might be cheaper to take it to a data recovery company if you really need something on that one.
DonaldsRump
(7,715 posts)You won't need a power source. It's just like a very large thumb drive. Just plug it in to a USB port.
eppur_se_muova
(37,563 posts)(I'm not endorsing this particular model or merchant, but google for a phrase like "universal hard drive adapter" to see what's available. eBay sells lots of tech for old standards, new and used.)
I have a similar model from NewerTech. You might need a power adapter for the 4-pin Molex power connector, or you can open the computer's case and connect to a Molex adapter on the PSU (if there is one). The one at the link has a SATA power to Molex power adapter, but it's not obvious what the SATA gender is, unless your eyes are better than mine.